An old board with fuses, no surge protection or a single RCD for everything: after a storm the electronics fail, the washing machine trips the whole house, there is nowhere to connect a charger. A new consumer unit gets separate circuits, surge protection and space for whatever you add later. Installation with removal of the old board takes 4–8 hours.
We reply within 1 working day with a proposed consumer unit and the price including installation. A photo of the open board and your postcode are enough.
Wiring diagram, circuit chart, test report and declaration of conformity included.
Warsaw and up to 50 km with no travel surcharge.
8% VAT for installation in a residential building — we confirm the rate during verification. 50% deposit on ordering, the rest before installation.
Prefer your own electrician? Courier delivery: total from PLN 2,077.47 incl. VAT — the consumer unit with wiring diagram and circuit chart; your electrician does the connection and testing.
For a flat or a small house — in place of a board with 6–12 fuses.
For a single-family house — in place of a board with 12–20 fuses.
Price incl. VAT from today’s price list, excluding delivery. After we verify your installation it changes only if the scope changes — and we will tell you before production starts. “Add to basket” adds the consumer unit to your order, “Customise” takes you to the configurator, where you can change every item.
Installation at your home usually takes 4–8 hours, with the power off while we work. The consumer unit is built in our workshop beforehand (5–10 working days from the deposit).
No need — a photo of the open board and your postcode are enough. If anything is unclear, we will call or arrange to look at it during installation.
Yes — we ship by courier anywhere in Poland with the wiring diagram, circuit chart and the workshop test report. Your electrician does the connection and testing on site.
Replacing the consumer unit after the meter does not need to be notified. If you are moving the meter or changing your supply capacity, it does — and we will prepare a meter board to the network operator’s requirements.
Nothing is wasted: spare ways stay as reserve for the future (charger, air conditioning). During verification we match the number of circuits to what you have — we reuse the existing cables.
Didn't find an answer? Ask a question using the contact form — we reply within 1 working day.