Svalcon
New house

Consumer unit for a new house — designed for the future

In a new house, the cheapest option is to build the consumer unit once, with spare capacity. Adding solar PV, a battery or a charger a few years later shouldn’t mean replacing the board. The 96-module enclosure (4 rows) has space for everything.

See ready-made consumer unitsBuild from scratch in the configurator

Sound familiar?

  • The site electrician fitted the “standard”: 12 circuits and no room to expand.
  • Every installer (PV, heat pump, charger) adds their own box next to it.
  • No documentation — when the house is signed off or insured, the test report is missing.

What's in this consumer unit

  • 96-module enclosure (4 rows × 24), RCDs in groups by number of circuits, Type 1+2 SPD, up to 40 circuits.
  • Sections for solar PV, a home battery, an EV charger and a heat pump — straight away or as spare capacity.
  • Smart Ready: power supply and gateway for smart home, so you can add control later.
  • Wiring diagram, circuit chart, test report and EU declaration of conformity for the building sign-off.

Ready-made consumer units for this situation

Most popular

Consumer unit L · Standard

Large house of 150–250 m², usually two-storey — separate circuits for each floor, the garage and the garden — without solar PV or EV charger, replacing an old board with a new one with surge protection.

72-module enclosure48 of 72 modulesfits
  • 22 circuits for sockets, lighting and appliances
  • 4 four-pole residual current devices and a T1+T2 surge protection device
  • Wiring diagram, circuit chart, test report and declaration of conformity included
fromPLN 4,046.70incl. VAT · PLN 3,290.00 excl. VAT · excluding delivery
Customise

Energy-efficient house — “everything”

A new house with solar PV, a home battery, a heat pump and an EV charger, controlled by surplus energy — all in one consumer unit.

96-module enclosure66 of 96 modulesfits
  • Solar panels: inverter section and a box on the panel side
  • Home battery with whole-house backup power (automatic transfer switch)
  • Heat pump section with contactor and controller supply
  • Electric car charger section, 11 kW
  • Smart Energy — control from solar surplus and tariffs
fromPLN 17,724.30incl. VAT · PLN 14,410.00 excl. VAT · excluding delivery
Customise

Price incl. VAT from today’s price list, excluding delivery. After we verify your installation it changes only if the scope changes — and we will tell you before production starts. “Add to basket” adds the consumer unit to your order, “Customise” takes you to the configurator, where you can change every item.

Do we install at your address? Check by postcode

Frequently asked questions

Who installs the consumer unit on the building site?

Your electrician — they get a finished, tested consumer unit with a circuit chart and wiring diagram, and connect the cables according to the chart. We can also install it ourselves in and around Warsaw.

How many circuits does a 200 m² house need?

Usually 20–28: 2 per room (sockets and lighting), the kitchen separately (4–5), bathrooms, utility room, garage, garden, gate and alarm. It is better to add 3–4 spare ones.

Didn't find an answer? Ask a question using the contact form — we reply within 1 working day.

Other situations

Consumer unit replacement

Power tripping in the whole house? We replace your board with a new one — tested, in one day.

View
Home battery

Consumer unit for a home battery and backup power

View
EV charger

Consumer unit for an electric car charger

View
Heat pump

Consumer unit for a heat pump

View
To your specification

A consumer unit to your specification — in 5–10 days, with acceptance documents.

View